LATHE

Lathe was invented by
1. Henry Maudslay
2. Eli Whitney
3. James Nasmith
4. Michael Faraday
What connects the front and back portion of bed guideways like a bridge?
1. Carriage
2. Saddle
3. Spindle
4. Headstock
What is mounted on the legs of the lathe which are bolted to the floor?
1. Carriage
2. Headstock
3. Tailstock
4. Bed
Which part connects cross slide and compound slide?
1. Steady rest
2. Cross rest
3. Compound rest
4. Rest
The first screw cutting lathe was developed in
1. 1787
2. 1795
3. 1797
4. 1757
The process of machining a workpiece to the required shape and size by moving the cutting tool either parallel or perpendicular to the axis of rotation of the workpiece is known as
1. Turning
2. Chamfering
3. Knurling
4. None of these
What freely rotates on two large bearings housed on the headstock casting?
1. Saddle
2. Spindle
3. Cross slide
4. Carriage
What is situated on the saddle and slides on the dovetail guideways at right angles to the bed guideways?
1. Carriage
2. Compound rest
3. Spindle
4. Cross slide
What are are used to control the distance of tool movement?
1. Feed rod
2. Limit Dogs
3. Bench lathe
4. Compound rest
What is mounted on a slide called ram which is mounted on the saddle?
1. Headstock
2. Apron
3. Turret Head
4. Taper