Milling Machines
Crossword
Complete the crossword, then click on "Check" to check your answer. If you are stuck, you can click on "Hint" to get a free letter. Click on a number in the grid to see the clue or clues for that number.
Check
Across: 2. The work is held between the center of the spindle and the 4. fitted on the front end of the worm shaft. 5. arranged between the main spindle and the driven shaft when indexing is done by differential indexing method 6. used to eliminate the necessity of counting the holes on the index plate each time the index crank is moved. 8. milling commonly used to produce square or hexagonal surface. 9. in a milling machine is defined as the distance the workpiece advance under the cutter.
Down: 1. relieved back portion of the tooth adjacent to the cutting edge 3. distance travelled by a point on the cutting edge of the milling cutters to remove metal in time duration of one minute. 7. positioned in the required hole circle and rotated through a calculated amount while indexing. 9. Machining convex and concave surfaces and gear cutting are some examples of _____ milling.