MILLING MACHINE

Gap-fill exercise

  
Fill in all the gaps, then press "Check" to check your answers. Use the "Hint" button to get a free letter if an answer is giving you trouble. You can also click on the "[?]" button to get a clue. Note that you will lose points if you ask for hints or clues!
The spindle rotation is transmitted to the arbor and the is rotated.

The of the cutter fits into the taper hole of the adapter.

By having the universal milling attachments the spindle of the machine can be swiveled about perpendicular axes.

The rotary movement of the spindle is converted into reciprocating movement of the ram by a arrangement.

head attachment is a special work holding device used for dividing the periphery of the work into any number of equal divisions.

Side milling cutters have on its periphery and also on one or both of its sides.

Plain milling cutters are in shape and have teeth on the circumferential surface only.

is intended for cutting narrow, deep slots and for parting off operation.

The of the angle milling cutter are not parallel to the axis but are at an angle to it.

cutter is the simplest form of cutter.