Milling Machine

Which part of the cutter fits into the taper hole of the adapter?
1. Teeth
2. Collet
3. Arbor
4. Shank
By having the universal milling attachments the spindle of the machine can be swiveled about how many perpendicular axis/axes?
1. Only one
2. Two
3. Three
4. None of these
Shape of Plain milling cutters is
1. Spherical
2. Cubical
3. Cylindrical
4. None of these
Simplest form of cutter is
1. Form cutter
2. Face cutter
3. Angular cutter
4. Flying cutter
Which part is intended for cutting narrow, deep slots and for parting off operation?
1. Cutter
2. Metal slitting saw
3. Indexing head
4. None of these
The portion of the teeth next to the cutting edge is known as
1. Column
2. Knee
3. Feed
4. Face
Angle between land of the tooth and the tangent to the outside diameter of the cutter at the cutting edge of the particular tooth is called
1. Relief angle
2. Rake angle
3. Primary clearance angle
4. Secondary clearance angle
Angle between the back of the tooth and the tangent drawn to the outside diameter of the cutter at the cutting edge is called
1. Relief angle
2. Rake angle
3. Primary clearance angle
4. Secondary clearance angle
Angle formed by the secondary clearance surface and the tangent to the periphery of the cutter at the cutting edge is called
1. Relief angle
2. Rake angle
3. Primary clearance angle
4. Secondary clearance angle
Angle measured in the diametral plane between the face of the tooth and a radial line passing through the cutting edge of the tooth is called
1. Relief angle
2. Rake angle
3. Primary clearance angle
4. Secondary clearance angle