Milling Machine

In a milling machine, the distance the workpiece advance under the cutter is called
1. Depth
2. Feed
3. Indexing
4. None of these
The thickness of the material removed in one pass of the work below the cutter is called
1. Indexing
2. Feed
3. Depth
4. None of these
Method of dividing the periphery of a piece of work into any number of equal parts is called
1. Vertical Milling
2. Indexing
3. Horizontal milling
4. None of these
What is situated at the centre of the dividing head?
1. Spindle
2. Arbor
3. Teeth
4. Collet
What is situated at right angles to the main spindle of the dividing head?
1. Angular shaft
2. Collet
3. Worm shaft
4. Teeth
What is fitted on the front end of the worm shaft?
1. Sector arm
2. Gear train
3. Straddle
4. Indexing plate
What is the distance travelled by a point on the cutting edge of the milling cutters to remove metal in time duration of one minute called?
1. Depth
2. Feed
3. Cutting speed
4. Feed per minute
Machining convex and concave surfaces and gear cutting are some examples of
1. Form milling
2. End milling
3. Face milling
4. Angular milling
The work is held between the center of the spindle and the
1. Teeth
2. Tailstock
3. Gear arm
4. Arbor
The relieved back portion of the tooth adjacent to the cutting edge is called
1. Land
2. Face
3. Base
4. Column